Home > Sheet and Plates > Stainless Steel 410S Sheet and Plates
Weston Stainless, Midland, UK is a well-known supplier of high-grade stainless steel products, one of which is Stainless Steel 410S Sheet and Plates. Produced from grade 410S stainless steel, these plates and sheets are a low-carbon, non-hardening type of martensitic stainless steel that provides improved corrosion and oxidation resistance with good strength and ductility. Used in several forms and gauges, the sheets and plates are extensively employed in high-temperature resistant industries and moderate strength mechanical applications. With enhanced weldability and resistance to scaling, they are suited for fabrication and structural purposes.
The Stainless Steel 410S Sheet and Plates consist mainly of iron with 11.5-13.5% chromium content for resistance against corrosion and below 0.08% carbon to avoid hardening. They possess a tensile strength of approximately 415 MPa, a yield strength of about 205 MPa, and an elongation of 22%. They have a density of approximately 7.7 g/cm³ and good thermal conductivity with a melting point of about 1480°C. Their moderate strength, toughness, and oxidation resistance make them ideal for high-temperature use.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
| Element | SS 410S |
| C | 0.08 max |
| Mn | 1 max |
| Si | 1 max |
| P | 0.040 max |
| S | 0.030 max |
| Cr | 11.5 – 13.5 |
| Fe | 85 |
| Element | SS 410S |
| Density | 7.8 g/cm3 |
| Tensile Strength | psi – 64,400, MPa – 444 |
| Yield Strength (0.2%Offset) | psi – 42,000, MPa – 290 |
| Elongation | 33 % |
| Hardness | Rockwell B (HR B)- 75 / Brinell (HB)- 65 |
Contact us to get a quick quote for your requirement.
Excellent corrosion resistance with high strength and toughness. The sheets come in a wide range of thicknesses, starting from 1.5 mm up to 20 mm with widths up to 2000 mm. These are suitable for high-impact resistant applications.
Corrosion resistance along with a smooth, bright surface finish. Usually made available in width up to 1500mm and in different thickness ranges such as 0.5-6 mm these plates are specially suited for use in precision engineering and for critical applications where closer tolerances apply.
Excellent corrosion and slip resistance. These sheets are available in various thicknesses from 1.2 mm to 6 mm and up to 2000 mm x 1000 mm dimensions, which make them suitable for flooring and decorative applications.
Corrosion with increased ventilation and aesthetics. The perforated plates are available in a number of hole sizes and patterns, available in thicknesses ranging from 1 mm up to 4 mm and available in dimensions up to 2500 mm × 1200 mm for filters and screens.
Available with corrosion resistance and precise control over thickness. These sheets are available in 0.1 mm thickness up to 1000 mm x 1000 mm, cut to size for fine-tuning mechanical fits.
Outstanding corrosion resistance and have a highly reflective finish. The plates are usually available in sizes up to 2000 mm x 1000 mm with thickness between 1mm and 6mm. Stainless Steel 410S Polished Plates are used in aesthetic applications as well as in decorative purposes.
Stainless Steel 410S Plates and Sheets find extensive application in automotive, chemical processing, power generation, and petrochemical industries. They are particularly suited for fabrication of furnace components, exhaust systems, heat exchangers, and structural parts because of their high-temperature resistance and oxidation resistance. They are also well-suited for use in food processing, marine environments, and construction, where structural integrity and durability are paramount, because of their weldability and corrosion resistance.
Stainless Steel 410S Sheet and Plates are provided with mill test certificates, third-party inspection certificates, and compliances to adhere to industry standards. They are packed safely in wooden crates, plastic wraps, or steel-strapped bundles to avoid damage during shipping. Weston Stainless facilitates safe and timely international delivery through reliable shipping methods.
©2024 Weston Stainless All Rights Reserved.
